PowerShell

The PowerShell forum accepts bug reports as well as feedback and suggestions. For more information, check out the PowerShell Homepage

The following is a list of the states we use to track items.

status meaning
survey We saw this and we are considering it. Please upvote if it’s important to you.
needs more information We don’t understand the issue and need additional details.
investigating We are looking at this internally to understand things like: scenario, reproduction of issue, costing, or other technical details.
in queue The issue is understood and in our unprioritized backlog. Your votes will be used to drive prioritization of this work.
  • Hot ideas
  • Top ideas
  • New ideas
  • My feedback
  1. LCM on clean Windows 2012R2 with WMF 5.0 Feb preview don't apply configuration from Current.mof file.

    Votes from Connect: 3

    Original Date Submitted: 4/24/2015 8:39:47 PM

    Description:
    Contact Information
    Handle: Juris Krumins
    Site Name: PowerShell
    Feedback ID: 1274851


    Frequency: Desired State Configuration (DSC)
    Regression: Install Windows 2021R2, install WMF 5.0 Feb preview and put your mof configuration file to the C:\Windows\System32\Configuration with the Current.mof file name. Wait at least 15 min and LCM should start apply configuration.
    Works with Windows 2012 and WMF 5.0 Feb preview installed.

    Problem Description:
    Clean Windows 2012R2 box with WMF 5.0 Feb preview installed and configuration have been pushed as C:\Windows\System32\Configuration\Current.mof file. I can't see any signs in DSC Evenlog, that…

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Desired State Configuration (DSC)  ·  Flag idea as inappropriate…  ·  Admin →
  2. WMF5 (KB3037315) install breaks Commands add-on in PowerShell ISE for admin

    Votes from Connect: 6

    Original Date Submitted: 4/24/2015 1:03:59 AM

    Description:

    Contact Information
    Handle: Mathias JWD
    Site Name: PowerShell
    Feedback ID: 1272913


    Frequency: PowerShell ISE
    Regression: 1. Install KB3037315
    2. Run ISE as administrator
    3. Commands addon does not show any commands or modules
    4. Click Run/Insert/Copy, ISE will crash.

    Problem Description:
    After I installed KB3037315 on my Windows 8.1 PC, the Commands Add-on in my PowerShell ISE did no longer show any commands, the Modules drop down box remained empty. When clicking any of the three buttons on the bottom (Run/Insert/Copy), the ISE would crash.

    This happened only for…

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Other PowerShell  ·  Flag idea as inappropriate…  ·  Admin →
  3. The PowerShell course that Microsoft is offering via edX should have a free audit option like the other Microsoft/edX courses

    Votes from Connect: 7

    Original Date Submitted: 4/23/2015 6:45:25 PM

    Description:
    Contact Information
    Handle: Kirk Munro
    Site Name: PowerShell
    Feedback ID: 1271897


    Problem Description:
    I discussed this with Kenneth at the PowerShell Summit this week, and he suggested I log an issue here. There is a PowerShell course on edX that can be found here:

    https://www.edx.org/course/windows-powershell-fundamentals-microsoft-inf201x

    This course costs $200 US.

    There are 6 other Microsoft courses on edX on C#, TypeScript, Bootstrap, Azure, O365, and Transact-SQL. Those courses offer both a paid certificate option and a free audit option. But the PowerShell one only has a $200 US paid…

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Other PowerShell  ·  Flag idea as inappropriate…  ·  Admin →
  4. PowerShell should have a cmdlet that supports best effort magic number parsing on files without extensions or incorrect extensions

    Votes from Connect: 4

    Original Date Submitted: 4/14/2015 8:18:28 AM

    Description:
    Contact Information
    Handle: JasonHorner
    Site Name: PowerShell
    Feedback ID: 1246396


    Problem Description:
    often we need to parse a file and not rely on its extension, while magic number parsing is imperfect it can provide some value.
    this could be used for general file parsing as well as some security scenarios

    Here is a script that implements this feature though I don't think it is completely robust:
    http://powershell.com/cs/blogs/tips/archive/2010/08/09/reading-file-quot-magic-number-quot.aspx

    unix support a similar capability via the file utility:
    http://en.wikipedia.org/wiki/File_%28command%29

    More info on magic number parsing:
    http://en.wikipedia.org/wiki/Listoffile_signatures

    Product Studio item…

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  PowerShell Engine  ·  Flag idea as inappropriate…  ·  Admin →
  5. Script Analyzer - Severity for Custom Rule does not work

    Votes from Connect: 6

    Original Date Submitted: 3/20/2015 7:53:36 PM

    Description:
    Contact Information
    Handle: Stefan Stranger
    Site Name: PowerShell
    Feedback ID: 1192179


    Frequency: Always Happens
    Regression: I do not know if this issue existed previously

    Problem Description:
    When creating a custom script analyzer rule the severity does not seem to be executed.

    Example:
    <#

    .SYNOPSIS
    
    You should never use Write-Host to create any script output whatsoever.
    .DESCRIPTION
    It is generally accepted that you should never use Write-Host to create any script output whatsoever, unless your script (or function, or whatever) uses the Show verb (as in, Show-Performance).
    That verb explicitly
    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Other PowerShell  ·  Flag idea as inappropriate…  ·  Admin →
  6. about_Remote_Troubleshooting Group Policy incorrect for 2012 R2

    Votes from Connect: 4

    Original Date Submitted: 3/17/2015 8:27:30 PM

    Description:
    Contact Information
    Handle: Ashley McGlone
    Site Name: PowerShell
    Feedback ID: 1186090


    Frequency: Always Happens
    Regression: Yes, this happens in previous released versions

    Problem Description:
    The aboutRemoteTroubleshooting topic needs to be updated for 2012 (R2). The group policy setting name has changed:

    Allow automatic configuration of listeners (2008 R2)
    Allow remote server management through WinRM (2012 R2)

    The policy name appears twice in the help text:

    -- To configure listeners for remoting, enable the &quot;Allow automatic
    
    configuration of listeners&quot; group policy. For instructions, see
    &quot;How to Enable Listeners
    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Other PowerShell  ·  Flag idea as inappropriate…  ·  Admin →
  7. Love PowerShell but not a fan of one syntax requirement

    Votes from Connect: 6

    Original Date Submitted: 3/14/2015 4:56:44 AM

    Description:
    Contact Information
    Handle: J. Michael Delaney
    Site Name: PowerShell
    Feedback ID: 1179419


    Problem Description:
    Love PowerShell. It helps me so much in my daily tasks and I am constantly wowing co-workers with my skills.

    When scripting, the only thing I don't like about PowerShell is that when doing conditional statements with if/elseif/else and looping constructs, that I need to use brace brackets when the conditional or loop executes one line of code.

    For example, in other languages such as C++, I can do this:

    If(x=10)
    std::cout << "hello world!" …

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Other PowerShell  ·  Flag idea as inappropriate…  ·  Admin →
  8. Enable authoring of DSC resources using c# in a similar way as with ps classes

    Votes from Connect: 3

    Original Date Submitted: 3/12/2015 9:51:57 PM

    Description:
    Contact Information
    Handle: aL3891
    Site Name: PowerShell
    Feedback ID: 1175982


    Problem Description:
    We're now able to write DSC resources using classes in powershell and that is really great!

    Please also enable writing resources in c# in a similar way using a single class and attributes to mark properties and methods as their DSC equivalent. that would reduce alot of the friction for developers coming in to DSC from c#

    Product Studio item created by Connect Synchronizer due to creation of feedback ID 1175982 (http://connect.microsoft.com/PowerShell/feedback/ViewFeedback.aspx?FeedbackID=1175982).

    Repro Steps:

    Internal…

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Desired State Configuration (DSC)  ·  Flag idea as inappropriate…  ·  Admin →
  9. Add DefaultValue property to System.Management.Automation.CommandParameterInfo class

    Votes from Connect: 8

    Original Date Submitted: 3/3/2015 5:52:55 AM

    Description:
    Contact Information
    Handle: June Blender
    Site Name: PowerShell
    Feedback ID: 1157696


    Frequency: Always Happens
    Regression: Yes, this happens in all previous versions

    Problem Description:
    Currently, there is no way to detect whether a command parameter has a default value or what the default value is. It's important to help authoring and to command parsing.

    I can use the AST to get the default value, but that works only for functions and scripts; not for cmdlets.

    Product Studio item created by Connect Synchronizer due to creation of feedback ID 1157696…

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Other PowerShell  ·  Flag idea as inappropriate…  ·  Admin →
  10. Deep nested workflows don't recognize the erroraction parameter

    Votes from Connect: 5

    Original Date Submitted: 3/2/2015 8:58:03 PM

    Description:
    Contact Information
    Handle: Trond Hindenes
    Site Name: PowerShell
    Feedback ID: 1156994


    Frequency: Always Happens
    Regression: I do not know if this issue existed previously

    Problem Description:
    If a workflow uses deep nesting (at least 3 levels of nesting), erroraction does not work. This is reproducable in both the V4 and V5 feb preview of the WMF.

    Product Studio item created by Connect Synchronizer due to creation of feedback ID 1156994 (http://connect.microsoft.com/PowerShell/feedback/ViewFeedback.aspx?FeedbackID=1156994).

    Repro Steps:
    Consider the following 3 workflows
    workflow one
    {

    Write-Output &quot;one&quot;
    

    }

    workflow two
    {

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Other PowerShell  ·  Flag idea as inappropriate…  ·  Admin →
  11. Flags Enumeration Bitwise Operations Fail With 'Specified cast is not valid' Error

    Votes from Connect: 3

    Original Date Submitted: 2/19/2015 11:08:09 PM

    Description:

    Contact Information
    Handle: Rohn Edwards
    Site Name: PowerShell
    Feedback ID: 1138469


    Frequency: Always Happens
    Regression: No, this is new to the most recent version

    Problem Description:
    In the December 2014 and February 2015 WMF 5.0 previews, flags enumerations that have byte, sbyte, short, or ushort underlying types have to be cast or coerced to a numeric type before -band, -bor, or -bxor bitwise operations will work.

    int, uint, long, and ulong underlying types still work as expected.

    Product Studio item created by Connect Synchronizer due to creation of feedback…

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  PowerShell Engine  ·  Flag idea as inappropriate…  ·  Admin →
  12. Parameter validation

    Votes from Connect: 5

    Original Date Submitted: 2/6/2015 3:54:49 PM

    Description:
    Contact Information
    Handle: edi89
    Site Name: PowerShell
    Feedback ID: 1117495


    Frequency: Always Happens
    Regression: I don't know if this issue existed previously

    Problem Description:
    Using paramter validation in functions works just find - something like this:
    function test{

    Param (
    
    [ValidateRange(3,8)]
    [Int] $mytest )

    write-host $mytest

    }
    test 4
    test 9
    The problem is, that it seems, that parameter validation is in fact just a special case of variable validation which leads to the circumstance, that the variable used (in this case $mytest) is beeing validated every time you…

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  PowerShell Engine  ·  Flag idea as inappropriate…  ·  Admin →
  13. Add snippet support to the console as well

    Votes from Connect: 3

    Original Date Submitted: 1/30/2015 5:06:50 AM

    Description:
    Contact Information
    Handle: Stephen Owen
    Site Name: PowerShell
    Feedback ID: 1107509


    Frequency: Always Happens
    Regression: I don

    Problem Description:
    Now that I've gotten used to ISE-Snippets, I love them and I have a huge selection of them to help me with calculated properties, custom objects, and things like that. I'd love to be able to use ISE-Snippets in the PowerShell console as well.

    We can already hit F7 to see a list of the last 40 or so commands in our window. How about adding a similar window for…

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  PowerShell Engine  ·  Flag idea as inappropriate…  ·  Admin →
  14. DSC Please make sure key properties are unique for each resource in a node.

    Votes from Connect: 3

    Original Date Submitted: 1/29/2015 7:34:02 AM

    Description:
    Contact Information
    Handle: aL3891
    Site Name: PowerShell
    Feedback ID: 1106345


    Frequency: Always Happens
    Regression: Yes, this happens in previous released versions

    Problem Description:
    i've investigated DSC but found it to be almost unusable on any kind of scale since it seems every variable is stored in some global scope, not even quantified with step names.

    This makes it impossible to so something as simple as stopping and starting a service to update it, surely a common scenario. (Because the "Name" has to be unique)

    Even worse, trying to work…

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Desired State Configuration (DSC)  ·  Flag idea as inappropriate…  ·  Admin →
  15. MKDIR and RM needs unix-like most pertinent switches

    Votes from Connect: 3

    Original Date Submitted: 1/3/2015 6:07:28 AM

    Description:
    Contact Information
    Handle: The Deeds
    Site Name: PowerShell
    Feedback ID: 1074131


    Frequency: Always Happens
    Regression: Yes, this happens in all previous versions

    Problem Description:
    Part 1:

    In bash, we say:

    rm -f

    In Powershell, the equivalent is:

    rm -Force

    Please add an alias -f, so to make it compatible with unix-like shells. It helps a lot in C/C++ CMAKE and other scripting scenarios like Nodejs etc.

    Part 2:

    We desperately need mkdir -p (or --parents) switch of Unix in Windows. Going by the man (manual); http://www.computerhope.com/unix/umkdir.htm, it says:

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Other PowerShell  ·  Flag idea as inappropriate…  ·  Admin →
  16. Cannot Connect to Office 365 since November's WMF5

    Votes from Connect: 3

    Original Date Submitted: 1/3/2015 3:54:37 AM

    Description:
    Contact Information
    Handle: rpseekell
    Site Name: PowerShell
    Feedback ID: 1074018


    Frequency: Always Happens
    Regression: No, this is new to the most recent version

    Problem Description:
    I use this script to connect to Office 365 via PowerShell, which I think is pretty standard:
    $cred = Get-Credential
    $sess = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://ps.outlook.com/powershell/ -Credential $cred -Authentication basic -AllowRedirection
    Import-PSSession -Session $sess

    However, since updating to the November preview of PowerShell (WMF) 5, the new-PSSession command hangs and never finishes. I get a message like,
    WARNING: Your connection has been redirected…

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Other PowerShell  ·  Flag idea as inappropriate…  ·  Admin →
  17. German installer for Microsoft Security Essentials has wrong messages

    Votes from Connect: 3

    Original Date Submitted: 1/2/2015 7:28:29 AM

    Description:
    Contact Information
    Handle: Roland Illig 2
    Site Name: PowerShell
    Feedback ID: 1073011


    Frequency: Always Happens
    Regression: Yes, this happens in all previous versions

    Problem Description:
    The German version of the installer for Microsoft Security Essentials has two wrong translations:


    1. „Falls keine Firewall aktiviert ist, aktivieren Sie die Windows-Firewall (empfohlen).“

    This text should not even be in the installer in this form. Either the firewall is already activated, then the checkbox is useless and must not be shown at all. Or the firewall is not already activated, then the ”If…

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Other PowerShell  ·  Flag idea as inappropriate…  ·  Admin →
  18. New-Object fails on a class whose GetEnumerator method throws NotSupportedException

    Votes from Connect: 3

    Original Date Submitted: 12/11/2014 7:11:16 AM

    Description:
    Contact Information
    Handle: Clint Stotesbery
    Site Name: PowerShell
    Feedback ID: 1051712


    Frequency: Always Happens
    Regression: Yes, this happens in all previous versions

    Problem Description:
    I've run into a rare case. I can't use New-Object on a class whose GetEnumerator method throws NotSupportedException. System.Security.Cryptography.Xml.SignedInfo's GetEnumerator method throws a NotSupportedException: http://msdn.microsoft.com/en-us/library/system.security.cryptography.xml.signedinfo.getenumerator(v=vs.110).aspx

    The stack trace shows TypicalEnumerable as this method catches Exception and then rethrows it as an ExtendedTypeSystemException. I followed the complete stacktrace (hint: there are delegates involved not in the stack trace) and I can't figure out a way to…

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Other PowerShell  ·  Flag idea as inappropriate…  ·  Admin →
  19. Add-Member cmdlet invokes ScriptProperty members when adding new member

    Votes from Connect: 3

    Original Date Submitted: 12/4/2014 3:29:25 AM

    Description:

    Contact Information
    Handle: Josef Nemec
    Site Name: PowerShell
    Feedback ID: 1045858


    Frequency: Always Happens
    Regression: Yes, this happens in previous released versions

    Problem Description:
    When calling Add-Member over an object all ScriptProperty members are being invoked (script blocks from those properties are invoked). I found it during testing on PowerShell 5 preview (from Windows 10 preview build), but it also occurs in PS 4 (tested on Windows 8.1). It seems like it occurs only with System.Management.Automation.dll 6.3.9600.17400 and newer since it works for me on 8.1 machines with version…

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Other PowerShell  ·  Flag idea as inappropriate…  ·  Admin →
  20. PS4.0: (Get-Variable MyInvocation -Scope 1).Value fails when powershell.exe run from MSBuild

    Votes from Connect: 3

    Original Date Submitted: 11/7/2014 10:07:44 PM

    Description:

    Contact Information
    Handle: sba
    Site Name: PowerShell
    Feedback ID: 1023770


    Frequency: Always Happens
    Regression: No, this is new to the most recent version

    Problem Description:
    I have a script that contains the following code:

    --------------8<----------------
    function Get-ScriptDirectory{

    $Invocation = (Get-Variable MyInvocation -Scope 1).Value
    
    try {
    Split-Path $Invocation.MyCommand.Path -ea 0
    }
    catch {
    Write-Warning &#39;You need to call this function from within a saved script.&#39;
    }

    }

    $scriptdir = Get-ScriptDirectory

    Set-Location $scriptdir -ErrorAction Stop
    --------------8<----------------

    (this originates from PS2.0 days)

    The script runs fine, except if it's run from MSBuild…

    1 vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  PowerShell Engine  ·  Flag idea as inappropriate…  ·  Admin →
  • Don't see your idea?

Feedback and Knowledge Base